Yuken MHP-01-*-30 pressure valve

P90°:149 kN; H2:53.975 mm; R2:30.163 mm; Cap bolt:5/8-11 UNC; PG:1/4 NPT; Pa:20.7 kN; Housing:SSAFS 524; P120°:94.3 kN; Taconite seal:TER 111; Cap bolt recommended tightening torque:298.3 N·m;

Basic Static Radial Load Rating Co:36000 N; D:110.0000 mm; B:16.00 mm; d:80.000 mm; Basic Dynamic Radial Load Rating C:34500 N; Grease Speed Rating n1:5600 rpm; Oil Speed Rating n2:6700 rpm; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.30 mm;

Basic Static Radial Load Rating Co:83000 N; B:49.20 mm; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:2.00 mm; D:120.0000 mm; d:55.000 mm; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:95600 N;

d1 ≈:621 mm; r1,2 min.:3.3 mm; Calculation factor Y2:3; d:571.5 mm; Calculation factor Y0:2; Calculation factor e:0.33; Calculation factor Y1:2; Design variant/feature:TDI/Y2; Basic static load rating C0:18000 kN; r3,4 min.:6.4 mm;

Static (Cor):19.200 kN; D:80 mm; da:34 min; Oil:11 000 min-1; Da:70 max; Weight:0.53 kg; Grease:9 400 min-1; Pu:0.873 kN; d:25 mm; Bearing designation:6405  ;

Ca min.:5 mm; da max.:95 mm; T:30.163 mm; Calculation factor e:0.44; Basic static load rating C0:220 kN; Da min.:119 mm; Reference speed:3800 r/min; Basic dynamic load rating C:178 kN; Calculation factor Y0:0.8; Calculation factor Y:1.35;

PG:1/8 NPT; P180°:8.01 kN; P60°:20.9 kN; Cap bolt, SAE grade:5; h:25.4 mm; RG:1/8 NPT; L:209.55 mm; H2:20.637 mm; H:112.713 mm; Adapter sleeve assembly:SNW 9x1.1/2;

Grease Speed Rating n1:11000 rpm; B:40.00 mm; Oil Speed Rating n2:16000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:80000 N; d:70.000 mm; Fillet Radius rb:0.60 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:68900 N;

Fatigue load limit Pu:1.6 kN; Ew:23 mm; Basic static load rating C0:13.7 kN; Fw:19 mm; Reference speed:20000 r/min; U:13 mm; Basic dynamic load rating C:9.13 kN; Mass needle roller and cage assembly:0.008 kg; Limiting speed:24000 r/min;

Ew:170 mm; Fw:160 mm; Fatigue load limit Pu:56 kN; U:46 mm; Basic dynamic load rating C:145 kN; Limiting speed:2800 r/min; Basic static load rating C0:510 kN; Mass needle roller and cage assembly:0.55 kg; Reference speed:2600 r/min;

Locking device:MS 3072; B:45 mm; d:360 mm; G:Tr 360x5; G2:M 6; d1:340 mm; B5:58 mm; B1:188 mm; d3:420 mm; Hydraulic nut:HMV 72E;

Width Plain C2:255000 N; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating 40º C1:265000 N; D:240.0000 mm; d:110.000 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:2200 rpm; Basic Static Radial Load Rating 15º Co1:320000 N; Fillet Radius rb:1.00 mm; B:100.00 mm;

d:280 mm; da min.:290 mm; K:4 mm; Fatigue load limit Pu:173 kN; ra max.:2 mm; Mass bearing:16 kg; d1 ≈:308 mm; Basic dynamic load rating C:737 kN; Basic static load rating C0:1860 kN; B:69 mm;

Basic Static Radial Load Rating Co:11800 N; Basic Dynamic Radial Load Rating C:14600 N; Sealed Speed Rating n3:5600 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; d:50.000 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Fillet Radius ra:0.64 mm; B:12.00 mm; Accessories:One Seal; D:72.0000 mm;

Grease Speed Rating Open/Shielded n1:15000 rpm; B:7.00 mm; Fillet Radius ra:0.30 mm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:18000 rpm; Basic Dynamic Radial Load Rating C:4490 N; d:30.000 mm; D:42.0000 mm; Sealed Speed Rating n3:9500 rpm; Basic Static Radial Load Rating Co:3400 N;