Danfoss Shut-off valves 148B4654 STC 50 M ANG SHUT-OFF VALVE CAP

da min:131 mm; B:62 mm; Dynamic load, C:663 kN; rs min:2 mm; D:200 mm; ra max:2 mm; Characteristic cage frequency, FTF:0.44 Hz; Mass:7.67 kg; Fatigue limit load, Cu:62.3 kN; Brand:SNR;

Type:Bearings with Housin; Lateral Width L(mm):64; C Chamfered:Not Provided; RoHS:6; Bearing I.D. d(mm):17; Days to Ship:8 Days; Bearing Part Number:6903; Height Indication:Height Configurable; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea;

Accessory:No Cover; Basic Load Rating, Dynamic Rating(N):12800; Days to Ship:8 Days; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Diameter series symbol:Used for Light load; Seal:Silicone; Grease Type:SH33M; Rolling Element Ma

Tapered Bore:N; Design Units:METRIC; Da - Outer Ring Backing Diameter:139.500 mm; r - Outer Ring To Clear Radius3:1.300 mm; C - Inner Ring Width:50 mm; da - Inner Ring Backing Diameter:111.000 mm; DUR - Diameter Under Roller:112.800 mm; D:150 mm; B - Outer Ring Width:50 mm; C - Dynamic Radial Rating

Outer ring oil hole:Standard; RoHS:6; D:190; Load Direction:Radial; Rolling Element Material:Steel; Large-capacity type:Standard; d:90; Format symbol:NU (double brims for; Internal Clearance Symbol:C3 (Greater than nor; Cylinder shape (suffix symbol: X):No;

A2:68.7 mm; C:52.5 kN; H:250 mm; Weight:4.01 kg; G:M6x1; C0:32.8 kN; A1:18 mm; s1:32.55 mm; J:202 mm; e:29 mm;

N:12mm; T max.:100 °C; B1:28 mm; s1:16.5 mm; Designation of housing:FC204-; d1:32 mm; A2:26.5 mm; C0:6.6 kN; Designation of bearing:LK204G2H; A1:6 mm;

B:38.1 mm; L1:70 mm; A5:22.2 mm; H2:56 mm; Designation of housing:T206N-; G:M6x1; N2:37 mm; d:30.16 mm; N1:16 mm; A2:28 mm;

Designation of closed end cover:SCC204; d:20 mm; S:12.7 mm; Recommended tightening torque for set screw:5.5 Nm; s1:15.5 mm; A2:33.3 mm; C0:6.65 kN; G:M6x1; J:64 mm; T max.:100 °C;

Surface Treatment:No; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Diameter series symbol:For Heavy Load; Unit Body Material:Cast Iron; Stroke:No; Accessory:With steel plate cov; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:35;

Weight:0.5 kg; T min.:-20 °C; A2:33.3 mm; A1:11 mm; A:25.5 mm; L:60 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; B:31 mm; Designation of bearing:UC202-10G2T20;

Dimension P:1.1 in; Bearing - Housing - Seal:LSE612BXHKPS; Bearing Type:Split Cylindrical Ex; Dimension L:7.7 in; Cor - Static Load Rating:186142 lbf; Dimension N:14.375 in; Note:This product line wa; Cr - Dynamic Load Rating:117800 lbf; Dimension R:17.2 in; Maximum Speed:1220 rpm;

Days to Ship:7 Days; Width T(mm):25 ～ 60; Seals:ZZ (Double Shield); Type:Bearings with Housin; Shape:Flange Type; Number of Bearings:Double; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Flange Shape:Round Type;

Volume Discount:Available; Type:Bearings with Housin; Number of Bearings:Double; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Shape:Flange Type; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days;

Volume Discount:Available; Bearing I.D. d(mm):30; Number of Bearings:Double; Width T(mm):70; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining; Flange O.D. H(φ):104; Seals:VV (Non-Contact Rubb; RoHS:6;