Home>Products>Rexroth PRESSURE RELIEF VALVE>Rexroth DBW10B1-5X/315-6EG24N9K4 PRESSURE RELIEF VALVE
Rexroth DBW10B1-5X/315-6EG24N9K4 PRESSURE RELIEF VALVE
category
Rexroth PRESSURE RELIEF VALVE
Rexroth DBW10B1-5X/315-6EG24N9K4 SPECIFICATIONS
Rexroth DBW10B1-5X/315-6EG24N9K4 PRESSURE RELIEF VALVE Needs Nylon Retainer Material Analysis , Rexroth PRESSURE RELIEF VALVE GDA Hydraulic-Electrical Co., Ltd. Manufacturing Steel Bearing Inner Ring Material Service . Get Rogersville, TN Manufacturing Plant Location Your Free.
- Rexroth
DBW10B1-5X/315-6EG24N9K4
- Wear Plate
- 500F
- OILES 500F Cast Iron with Embedded Solid Lubricant
- Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2
- 35 mm
- Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s
- 77 mm
- Dry 0.15;Periodic Lubrication 0.25 m/s
- GDA Hydraulic-Electrical Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rexroth DBW10B1-5X/315-6EG24N9K4 PRESSURE RELIEF VALVEProduct Identifiers
- 150 mm
- Periodic Lubrication -40 to +302 °F, Dry -40 to +752
- FCU
- RoHS
- 3
- Lead Free
Rexroth DBW10B1-5X/315-6EG24N9K4 Rexroth DBW10B1-5X/315-6EG24N9K4 PRESSURE RELIEF VALVEInterchange guide
##Parts Table 1Rexroth DBW10B1-5X/315-6EG24N9K4 PRESSURE RELIEF VALVE## | ||||||||
---|---|---|---|---|---|---|---|---|
No. | D | d | Minimum Buy Quantity | Inventory | B | Weight | C | |
Swash Plate | 330,000 mm | 240,000 mm | 7 mm | RLS | ||||
Press Pin | 50.8 mm | 22.225 mm | N/A | 0.0 | ||||
Separator | 52 mm | 40 mm | Metric | 25,4 | ||||
Saddle Bearing | 0 Inch | 0 Millimeter | 2.953 Inch | 75 Millimeter | N/A | 0.0 | ||||
Shafts | 4.615 | 63.0 | N/A | 0.0 | ||||
Skeleton Oil Seal | 107000 lbf | 1700 | N/A | 0.0 | ||||
Rod | 19000 RPM | 0.0 | N/A | 0.0 | ||||
Swash Plate Assy | Steel | 25,4 | N/A | 0.0 | ||||
The Thrust Plate | 47 mm | 30 mm | No | 2.2650 in | ||||
Pressure Plate | 250.0000 mm | 95.000 mm | 2.095 | 7 | ||||
Spacer | 25,4 mm | 229000 N | 36000 | 2300 rpm | ||||
Cylinder Blocks | SWC5-1640 | Not Rated | 7/8" Bore; 2" Outside Diameter; 9/16" Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features | 40.9 |
Rexroth ZDB10VP2-4X/315 PRESSURE RELIEF VALVE | Rate Of Pressure Change:Wear Plate; Maximum Torque:500F; Pressurefree Operation:OILES 500F Cast Iron with Embedded Solid Lubricant; Control Fluid Drain:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Flow:35 mm; Sequence Valve:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Determining Operating Characteristics:77 mm; Maximum Permissible Speed (limit Speed):Dry 0.15;Periodic Lubrication 0.25 m/s; Drive Power:150 mm; Control Pressure Measurement:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Maximum Axial Force At Standstill:FCU; Power:RoHS; Displacement, geometric, per revolution:3; Torque:Lead Free; |
Rexroth ZDB10VP2-4X/100V PRESSURE RELIEF VALVE | Power:Wear Plate; Pressurefree Operation:500F; Moment of inertia rotary group:OILES 500F Cast Iron with Embedded Solid Lubricant; Pilot Pressure:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Maximum Torque:35 mm; Maximum Permissible Speed (limit Speed):Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Load Pressure:77 mm; Torque:Dry 0.15;Periodic Lubrication 0.25 m/s; Nominal Resistance:150 mm; Flow:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Case volume:FCU; Rotary stiffness:RoHS; Control Pressure Measurement:3; Control Fluid Drain:Lead Free; |
Rexroth ZDB10VP2-4X/315V PRESSURE RELIEF VALVE | Maximum Permissible Pilot Pressure:Wear Plate; Torque:500F; Voltage:OILES 500F Cast Iron with Embedded Solid Lubricant; Maximum angular acceleration:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Power:35 mm; Maximum rotational speed:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Rate Of Pressure Change:77 mm; Moment of inertia rotary group:Dry 0.15;Periodic Lubrication 0.25 m/s; Sequence Valve:150 mm; Drive Power:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Maximum Torque:FCU; Weight (approx.):RoHS; Pressurefree Operation:3; Control Pressure Measurement:Lead Free; |
Rexroth ZDB10VP2-4X/315V PRESSURE RELIEF VALVE | Maximum angular acceleration:Wear Plate; Rate Of Pressure Change:500F; Nominal Resistance:OILES 500F Cast Iron with Embedded Solid Lubricant; Maximum Permissible Pilot Pressure:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Maximum Axial Force At Standstill:35 mm; Maximum Volume Flow:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Drive Speed:77 mm; Load Pressure:Dry 0.15;Periodic Lubrication 0.25 m/s; Control Fluid Drain:150 mm; Control Pressure Measurement:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Drive Power:FCU; Weight (approx.):RoHS; Maximum rotational speed:3; Pressurefree Operation:Lead Free; |
Rexroth ZDB10VP2-4X/200 PRESSURE RELIEF VALVE | Maximum rotational speed:Wear Plate; Displacement, geometric, per revolution:500F; Maximum Torque:OILES 500F Cast Iron with Embedded Solid Lubricant; Load Pressure:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Maximum Permissible Speed (limit Speed):35 mm; Drive Power:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Maximum Axial Force At Standstill:77 mm; Control Fluid Drain:Dry 0.15;Periodic Lubrication 0.25 m/s; Maximum Volume Flow:150 mm; Pilot Pressure:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Rate Of Pressure Change:FCU; Nominal Resistance:RoHS; Determining Operating Characteristics:3; Voltage:Lead Free; |
Rexroth ZDB10VP2-4X/100V PRESSURE RELIEF VALVE | Voltage:Wear Plate; Maximum Volume Flow:500F; Pilot Pressure:OILES 500F Cast Iron with Embedded Solid Lubricant; Maximum Torque:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Maximum angular acceleration:35 mm; Maximum rotational speed:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Case volume:77 mm; Maximum Permissible Pilot Pressure:Dry 0.15;Periodic Lubrication 0.25 m/s; Control Pressure Measurement:150 mm; Weight (approx.):Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Rate Of Pressure Change:FCU; Flow:RoHS; Power:3; Sequence Valve:Lead Free; |
Rexroth ZDB10VP2-4X/200V PRESSURE RELIEF VALVE | Control Fluid Drain:Wear Plate; Maximum Volume Flow:500F; Maximum rotational speed:OILES 500F Cast Iron with Embedded Solid Lubricant; Pilot Pressure:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Maximum Torque:35 mm; Weight (approx.):Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Drive Speed:77 mm; Rate Of Pressure Change:Dry 0.15;Periodic Lubrication 0.25 m/s; Rotary stiffness:150 mm; Displacement, geometric, per revolution:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Control Pressure Measurement:FCU; Power:RoHS; Sequence Valve:3; Torque:Lead Free; |
Rexroth ZDB10VA-2-4X/50V PRESSURE RELIEF VALVE | Displacement, geometric, per revolution:Wear Plate; Control Pressure Measurement:500F; Voltage:OILES 500F Cast Iron with Embedded Solid Lubricant; Maximum Axial Force At Standstill:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Maximum rotational speed:35 mm; Maximum Torque:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Nominal Resistance:77 mm; Maximum Permissible Pilot Pressure:Dry 0.15;Periodic Lubrication 0.25 m/s; Maximum Volume Flow:150 mm; Drive Power:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Maximum Permissible Speed (limit Speed):FCU; Power:RoHS; Determining Operating Characteristics:3; Maximum angular acceleration:Lead Free; |
Rexroth ZDB10VP2-4X/200V PRESSURE RELIEF VALVE | Control Pressure Measurement:Wear Plate; Maximum Axial Force At Standstill:500F; Torque:OILES 500F Cast Iron with Embedded Solid Lubricant; Maximum angular acceleration:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Maximum Volume Flow:35 mm; Displacement, geometric, per revolution:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Voltage:77 mm; Determining Operating Characteristics:Dry 0.15;Periodic Lubrication 0.25 m/s; Maximum rotational speed:150 mm; Maximum Torque:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Nominal Resistance:FCU; Case volume:RoHS; Moment of inertia rotary group:3; Maximum Permissible Speed (limit Speed):Lead Free; |
Rexroth ZDB10VP2-4X/315 PRESSURE RELIEF VALVE | Rate Of Pressure Change:Wear Plate; Moment of inertia rotary group:500F; Maximum rotational speed:OILES 500F Cast Iron with Embedded Solid Lubricant; Weight (approx.):Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Rotary stiffness:35 mm; Maximum Permissible Pilot Pressure:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Voltage:77 mm; Flow:Dry 0.15;Periodic Lubrication 0.25 m/s; Control Fluid Drain:150 mm; Torque:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Maximum Torque:FCU; Drive Power:RoHS; Drive Speed:3; Maximum Permissible Speed (limit Speed):Lead Free; |
Rexroth ZDB10VP2-4X/200 PRESSURE RELIEF VALVE | Voltage:Wear Plate; Nominal Resistance:500F; Rotary stiffness:OILES 500F Cast Iron with Embedded Solid Lubricant; Maximum Permissible Pilot Pressure:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Maximum Permissible Speed (limit Speed):35 mm; Moment of inertia rotary group:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Maximum Torque:77 mm; Load Pressure:Dry 0.15;Periodic Lubrication 0.25 m/s; Sequence Valve:150 mm; Weight (approx.):Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Maximum Volume Flow:FCU; Drive Power:RoHS; Pilot Pressure:3; Power:Lead Free; |
Rexroth ZDB10VPA2-4X/50V PRESSURE RELIEF VALVE | Weight (approx.):Wear Plate; Moment of inertia rotary group:500F; Rate Of Pressure Change:OILES 500F Cast Iron with Embedded Solid Lubricant; Maximum angular acceleration:Dry 5;Dry Static 73.5;Periodic Lube 8;Periodic Lube Static 73.5 N/mm2Dry 5;Dry Static; Determining Operating Characteristics:35 mm; Control Fluid Drain:Dry 0.50, Periodic Lubrication 0.80 N/mm2 x m/s; Nominal Resistance:77 mm; Torque:Dry 0.15;Periodic Lubrication 0.25 m/s; Load Pressure:150 mm; Drive Power:Periodic Lubrication -40 to +302 °F, Dry -40 to +752; Sequence Valve:FCU; Maximum Volume Flow:RoHS; Maximum Permissible Pilot Pressure:3; Maximum Permissible Speed (limit Speed):Lead Free; |
Rexroth DBW10B1-5X/315-6EG24N9K4 PRESSURE RELIEF VALVE Video
Contact Us
- GDA Hydraulic-Electrical Co., Ltd.
- AddressAl. Stanow Zjednoczonych 63A 04-028 Warsaw, Poland
Rexroth DBW10B1-5X/315-6EG24N9K4 Technical Articles
How do you increase your water pressure? |
What is difference between hydraulic pump and motor? |
What type of hydraulic pump is most efficient? |
Rexroth PRESSURE RELIEF VALVE CATEGORIES
- Rexroth Solenoid directional valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Rexroth Vane pump
- Yuken single Vane pump
- Rexroth Piston Pump
- Rexroth check valve
- DENISON vane pump
- Yuken pressure valve
- Yuken Double Vane pump
- Rexroth PRESSURE RELIEF VALVE
- PAKER Piston Pump
- Yuken Piston pump
- BOSCH injector
- CUMMINS injector
- DELPHI injector
- DEUTZ injector
- COMMON RAIL injector