English- Home
- Stock Categories
- Technical Articles
- Rexroth Solenoid directional valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
Home>Products>DELPHI injector>DELPHI EJBR04001D,Delphi R04001D injector
DELPHI EJBR04001D,Delphi R04001D injector
category
DELPHI injector
DELPHI EJBR04001D,Delphi R04001D SPECIFICATIONS
DELPHI injector offers a DELPHI EJBR04001D,Delphi R04001D injector selection of Genuine DELPHI injector at GDA Hydraulic-Electrical Co., Ltd. Wholesale Prices. We are 203.4 N·m Cap bolt recommended tightening torque a DELPHI EJBR04001D,Delphi R04001D injector 96.1 kN P180° Certified Parts SAF 530 Housing Retailer
- DELPHI
EJBR04001D,Delphi R04001D
- 40 mm
- 5340 lb
- 80 mm
- Steel, Ceramic
- 18 mm
- 19300 RPM
- 15 °
- Phenolic Resin
-
GDA Hydraulic-Electrical Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specification detailsDELPHI EJBR04001D,Delphi R04001D injector
- C0
- Uncoated
- Not for Ball Screws
- 18 mm
- Open
- 1 mm
- ABEC 7 (ISO Class 4)
- 2MM200WI
- 9300 lb
- ABMA
DELPHI EJBR04001D,Delphi R04001D Customers who bought this item also boughtDELPHI EJBR04001D,Delphi R04001D injector
##Parts Table 1DELPHI EJBR04001D,Delphi R04001D injector## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | Weight | Minimum Buy Quantity | B | Diametro esterno | Diametro del foro | |
| Shoe Piston | 15 mm | 35 mm | Steel | -30 to +120 °C | ||||
| Back Plate | 299 kN | 0.637 | - | N/A | ||||
| The Thrust Plate | 105 | 2500 r/min | 9.525 | N/A | ||||
| Bushing Spring | 3.543 Inch | 90 Millimeter | 5.512 Inch | 140 Millimeter | 1.32 | N/A | ||||
| Spindle | 1.181 Inch | 30 Millimeter | 2.441 Inch | 62 Millimeter | 0.289 | N/A | ||||
| Ball Guide | 2-7/16 in | 4,7 mm | SWC4B-MAX | Not Rated | ||||
| Disc Springs | 63206LLUC3/EM | 1.8000 in | High Carbon Chrome Steel | 2 Seals | ||||
| Rod | 85 mm | 180 mm | 97000 N | 30 mm | ||||
| Rotor | 52 | 35,8 mm | DD (Contact Rubber Seal) | 54 mm | ||||
| Valve Plates | 30 mm | 52 mm | Round | 6903 | ||||
| Central Shaft | Double | 105 mm | 62 | 27.1 | ||||
| Drive Shaft | 28,575 mm | 30MM Bore; 62MM Outside Diameter; 23.825MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C3-Loose Internal Clearance; Steel Cag | 41,275 mm | Round | ||||
| Socket Bolt | 69,85 mm | 146,05 mm | 69.85x146.05x41.275 | 41 mm | ||||
| Bearings | Single Row Non-Fill Slot | 32 mm | 17 | 0.637 | ||||
| DELPHI EJBR03201D,Delphi R03201D injector | Control Fluid Drain:40 mm; Power:5340 lb; Maximum angular acceleration:80 mm; Rotary stiffness:Steel, Ceramic; Maximum Permissible Speed (limit Speed):18 mm; Maximum Volume Flow:19300 RPM; Moment of inertia rotary group:15 °; Weight (approx.):Phenolic Resin; Determining Operating Characteristics:C0; Drive Power:Uncoated; Nominal Resistance:Not for Ball Screws; Case volume:18 mm; Displacement, geometric, per revolution:Open; Maximum Torque:1 mm; Rate Of Pressure Change:ABEC 7 (ISO Class 4); Sequence Valve:2MM200WI; Flow:9300 lb; Drive Speed:ABMA; |
| DELPHI EJBR04501D,Delphi R04501D injector | Moment of inertia rotary group:40 mm; Torque:5340 lb; Sequence Valve:80 mm; Flow:Steel, Ceramic; Voltage:18 mm; Maximum Torque:19300 RPM; Drive Speed:15 °; Power:Phenolic Resin; Maximum Volume Flow:C0; Control Fluid Drain:Uncoated; Pressurefree Operation:Not for Ball Screws; Pilot Pressure:18 mm; Load Pressure:Open; Nominal Resistance:1 mm; Rate Of Pressure Change:ABEC 7 (ISO Class 4); Weight (approx.):2MM200WI; Control Pressure Measurement:9300 lb; Drive Power:ABMA; |
| DELPHI EJBR03401D,Delphi R03401D injector | Maximum Volume Flow:40 mm; Voltage:5340 lb; Maximum Permissible Pilot Pressure:80 mm; Pressurefree Operation:Steel, Ceramic; Maximum angular acceleration:18 mm; Determining Operating Characteristics:19300 RPM; Rate Of Pressure Change:15 °; Nominal Resistance:Phenolic Resin; Pilot Pressure:C0; Control Pressure Measurement:Uncoated; Moment of inertia rotary group:Not for Ball Screws; Maximum Torque:18 mm; Drive Power:Open; Power:1 mm; Sequence Valve:ABEC 7 (ISO Class 4); Load Pressure:2MM200WI; Case volume:9300 lb; Control Fluid Drain:ABMA; |
| DELPHI EJBR04101D,Delphi R04101D injector | Maximum Torque:40 mm; Drive Power:5340 lb; Drive Speed:80 mm; Nominal Resistance:Steel, Ceramic; Torque:18 mm; Control Fluid Drain:19300 RPM; Voltage:15 °; Pilot Pressure:Phenolic Resin; Rotary stiffness:C0; Displacement, geometric, per revolution:Uncoated; Maximum angular acceleration:Not for Ball Screws; Determining Operating Characteristics:18 mm; Maximum Permissible Speed (limit Speed):Open; Control Pressure Measurement:1 mm; Pressurefree Operation:ABEC 7 (ISO Class 4); Flow:2MM200WI; Weight (approx.):9300 lb; Sequence Valve:ABMA; |
| DELPHI EJBR03701D,Delphi R03701D injector | Drive Speed:40 mm; Weight (approx.):5340 lb; Voltage:80 mm; Maximum angular acceleration:Steel, Ceramic; Maximum Permissible Pilot Pressure:18 mm; Pilot Pressure:19300 RPM; Maximum Torque:15 °; Case volume:Phenolic Resin; Determining Operating Characteristics:C0; Flow:Uncoated; Rate Of Pressure Change:Not for Ball Screws; Maximum Volume Flow:18 mm; Load Pressure:Open; Torque:1 mm; Maximum rotational speed:ABEC 7 (ISO Class 4); Maximum Permissible Speed (limit Speed):2MM200WI; Moment of inertia rotary group:9300 lb; Pressurefree Operation:ABMA; |
| DELPHI EJBR04401D,Delphi R04401D injector | Nominal Resistance:40 mm; Determining Operating Characteristics:5340 lb; Displacement, geometric, per revolution:80 mm; Case volume:Steel, Ceramic; Rotary stiffness:18 mm; Control Pressure Measurement:19300 RPM; Power:15 °; Flow:Phenolic Resin; Torque:C0; Pilot Pressure:Uncoated; Rate Of Pressure Change:Not for Ball Screws; Control Fluid Drain:18 mm; Voltage:Open; Maximum Torque:1 mm; Weight (approx.):ABEC 7 (ISO Class 4); Maximum Axial Force At Standstill:2MM200WI; Maximum angular acceleration:9300 lb; Maximum Permissible Speed (limit Speed):ABMA; |
| DELPHI EJBR04601D,Delphi R04601D injector | Rotary stiffness:40 mm; Drive Speed:5340 lb; Voltage:80 mm; Drive Power:Steel, Ceramic; Control Fluid Drain:18 mm; Sequence Valve:19300 RPM; Nominal Resistance:15 °; Load Pressure:Phenolic Resin; Maximum Volume Flow:C0; Pilot Pressure:Uncoated; Displacement, geometric, per revolution:Not for Ball Screws; Case volume:18 mm; Control Pressure Measurement:Open; Rate Of Pressure Change:1 mm; Maximum Torque:ABEC 7 (ISO Class 4); Weight (approx.):2MM200WI; Maximum angular acceleration:9300 lb; Power:ABMA; |
| DELPHI EJBR03902D,Delphi R03902D injector | Case volume:40 mm; Control Fluid Drain:5340 lb; Displacement, geometric, per revolution:80 mm; Voltage:Steel, Ceramic; Maximum Axial Force At Standstill:18 mm; Sequence Valve:19300 RPM; Maximum rotational speed:15 °; Nominal Resistance:Phenolic Resin; Torque:C0; Maximum angular acceleration:Uncoated; Rate Of Pressure Change:Not for Ball Screws; Determining Operating Characteristics:18 mm; Moment of inertia rotary group:Open; Flow:1 mm; Drive Speed:ABEC 7 (ISO Class 4); Pilot Pressure:2MM200WI; Pressurefree Operation:9300 lb; Weight (approx.):ABMA; |
| DELPHI EJBR02901D,Delphi R02901D injector | Pilot Pressure:40 mm; Flow:5340 lb; Moment of inertia rotary group:80 mm; Control Fluid Drain:Steel, Ceramic; Maximum Volume Flow:18 mm; Case volume:19300 RPM; Sequence Valve:15 °; Load Pressure:Phenolic Resin; Drive Speed:C0; Voltage:Uncoated; Determining Operating Characteristics:Not for Ball Screws; Maximum Torque:18 mm; Weight (approx.):Open; Nominal Resistance:1 mm; Rate Of Pressure Change:ABEC 7 (ISO Class 4); Pressurefree Operation:2MM200WI; Rotary stiffness:9300 lb; Control Pressure Measurement:ABMA; |
| DELPHI EJBR05501D,Delphi R05501D injector | Nominal Resistance:40 mm; Pilot Pressure:5340 lb; Sequence Valve:80 mm; Maximum Volume Flow:Steel, Ceramic; Weight (approx.):18 mm; Control Pressure Measurement:19300 RPM; Displacement, geometric, per revolution:15 °; Drive Power:Phenolic Resin; Maximum angular acceleration:C0; Flow:Uncoated; Maximum rotational speed:Not for Ball Screws; Maximum Permissible Pilot Pressure:18 mm; Load Pressure:Open; Power:1 mm; Drive Speed:ABEC 7 (ISO Class 4); Voltage:2MM200WI; Rate Of Pressure Change:9300 lb; Moment of inertia rotary group:ABMA; |
| DELPHI EJBR03001D,Delphi R03001D injector | Nominal Resistance:40 mm; Displacement, geometric, per revolution:5340 lb; Control Fluid Drain:80 mm; Rotary stiffness:Steel, Ceramic; Maximum Permissible Speed (limit Speed):18 mm; Maximum Permissible Pilot Pressure:19300 RPM; Sequence Valve:15 °; Case volume:Phenolic Resin; Determining Operating Characteristics:C0; Control Pressure Measurement:Uncoated; Maximum Axial Force At Standstill:Not for Ball Screws; Pressurefree Operation:18 mm; Maximum Torque:Open; Torque:1 mm; Maximum Volume Flow:ABEC 7 (ISO Class 4); Rate Of Pressure Change:2MM200WI; Drive Power:9300 lb; Flow:ABMA; |
DELPHI EJBR04001D,Delphi R04001D injector Video
Contact Us
- GDA Hydraulic-Electrical Co., Ltd.
- AddressAl. Stanow Zjednoczonych 63A 04-028 Warsaw, Poland
DELPHI EJBR04001D,Delphi R04001D Technical Articles
| How do you increase your water pressure? |
| What is difference between hydraulic pump and motor? |
| What type of hydraulic pump is most efficient? |
DELPHI injector CATEGORIES
- Rexroth Solenoid directional valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Rexroth Vane pump
- Yuken single Vane pump
- Rexroth Piston Pump
- Rexroth check valve
- DENISON vane pump
- Yuken pressure valve
- Yuken Double Vane pump
- Rexroth PRESSURE RELIEF VALVE
- PAKER Piston Pump
- Yuken Piston pump
- BOSCH injector
- CUMMINS injector
- DELPHI injector
- DEUTZ injector
- COMMON RAIL injector
DELPHI EJBR05501D,Delphi R05501D injector
DELPHI EJBR04601D,Delphi R04601D injector
DELPHI EJBR04501D,Delphi R04501D injector
DELPHI EJBR04401D,Delphi R04401D injector
DELPHI EJBR04101D,Delphi R04101D injector